Auto Talk; Storing A Dialled Number Into The Phonebook - Panasonic KX-TCD725EM Operating Instructions Manual

KX-TCD725EM-1(02~23) 01.7.19 10:25 PM
Making Calls

Auto Talk

The auto talk feature allows you to answer a call by lifting the handset off the base unit without
pressing . The factory preset is OFF. In order to view Caller ID information before answering a
call, leave the auto talk feature OFF.
Make sure that the power is ON (p. 12), and the unit is in the standby mode.
To set the auto talk feature ON/OFF
1
Press .
2
Press or
to "Setting Handset", then press
.
3
Press or
to "Other Option", then press
4
Press or
to "Auto Talk", then press
The current setting is at the arrow.

Storing a Dialled Number into the Phonebook

Make sure that the power is ON (p. 12), and the unit is in the standby mode.
To store an entered number
into the phonebook
1
Enter a phone number.
The entered number is displayed.
If you misdial, press
erased from the right.
To cancel, press and hold
.
2
Press .
3
Follow steps 4 to 7 on Storing Caller List
Information into Phonebook (p. 23).
4
While "Save" is at the arrow, press
A beep sounds and "Saved" is displayed.
The display will return to the entered
phone number.
16
Page 16
5
until the arrow points
6
until the arrow points
.
until the arrow points
.
To store a redial number into
the phonebook
1
C . Digits are
2
C or press
3
4
.
Press or to select "ON" or "OFF".
Press .
A beep sounds.
The display will return to "Auto Talk".
To return to the standby mode, press
or wait for 60 seconds.
You can exit the programming mode any time
by pressing .
Press .
The last number dialled is displayed.
Press or until the arrow points
to the phone number you desire to store,
then press .
Follow steps 4 to 7 on Storing Caller List
Information into Phonebook (p. 23).
While "Save" is at the arrow, press
A beep sounds and "Saved" is displayed.
The display will return to the stored caller
information.
.