Panasonic KX-TCD725EM Operating Instructions Manual page 45

KX-TCD725EM-3(38~64) 01.7.19 10:42 PM
Setting the Range Warning Alarm ON/OFF
The factory preset is OFF.
Make sure that the power is ON (p. 12), and the unit is in the standby mode.
1
Press .
2
Press or until the arrow points
to "Setting Handset", then press
.
3
Press or until the arrow points
to "Tone Option", then press
4
Press or until the arrow points
to "Range Alarm", then press
The current setting is at the arrow.
Setting the Battery Low Alarm ON/OFF
The factory preset is ON.
Make sure that the power is ON (p. 12), and the unit is in the standby mode.
1
Press .
2
Press or until the arrow points to
"Setting Handset", then press
3
Press or until the arrow points to
"Tone Option", then press
4
Press or until the arrow points to
"Battery Alarm", then press
The current setting is at the arrow.
Page 45
5
Press or
"OFF".
6
Press .
A beep sounds.
The display will return to "Range
Alarm". To return to the standby mode,
press
.
You can exit the programming mode any time
by pressing
.
5
Press or
"OFF".
6
Press .
.
A beep sounds.
The display will return to "Battery
Alarm". To return to the standby mode,
.
press
You can exit the programming mode any time
.
by pressing
to select "ON" or
or wait for 60 seconds.
.
to select "ON" or
or wait for 60 seconds.
.
45