Minolta Di620PE Operato's Manual page 50

4-10
3. When the Message "The Staple Cartridge is empty." Appears
<Only when the Finisher FN-102 is mounted>
1 Press and turn the knob and open the cover at
the rear of the Finisher.
Pull the Stapler Unit out of the well.
2
3 While pressing down the green lever, pull out
the Staple Cartridge.
Di620PE Operator's Manual
4 Remove the empty staple clip from the
Staple Cartridge.
Load a new staple clip into the Staple
5
1155O766AA
Cartridge and carefully peel off the Seal.
1166O127AA
6 Insert the Staple Cartridge into the Stapler
Unit until it clicks into place.
7 Align the arrows and firmly push the Stapler
1166O128AA
Unit down into the well.
1166O129AA
1166O161AD
1166O130AB
1166O131AB