Basic Printing Overview; Manual Feed Tray - Minolta Di620PE Operato's Manual

2. Basic Printing Overview

Manual Feed Tray

• Use the Manual Feed to make prints on paper not loaded in any tray, or to print onto OHP
transparencies, thick paper, or any other special paper.
• When using the Manual Feed Tray, you can load multiple sheets of paper.
• The setting of paper size is needed for manual feed printing.
• Manual Feed cannot be used for a reserved job.
Paper that Can be Used for Manual Feed Tray
N
Types of Paper
• Plain paper (weighing 60 g/m
• Thick paper (weighing 91 g/m
• Recycled paper, OHP transparencies
N
Paper Size
• Max. Size : A3, 11-3/4"
• Minimum Size : A6, 4"
N
Capacity of the Manual Feed Tray
• Plain paper, Recycled paper⋅⋅⋅Up to 50 sheets
• Plain paper (once-copied paper)⋅⋅⋅Up to 20 sheets
• Thick paper, OHP transparencies⋅⋅⋅Up to 20 sheets
Using the Intelligent Manual Feed Tray
Swing down the Manual Feed Tray and insert
1
a neat stack of paper into the tray until it
stops.
* Slide the Tray Extender out when using
large-size paper.
Di620PE Operator's Manual
2 2
to 90 g/m , 16lbs. to 24 lbs.)
2 2
to 157 g/m , 24-1/4 lbs. to 41-3/4 lbs.)
×
17"
×
5-3/4"
1075O025AB
Slide the Paper Guide Plate to the size of the
2
paper.
NOTES
• The paper should be loaded no higher than
the M (Max. Level Indicator).
• Before inserting, fan the paper stack well if
you are using OHP transparencies.
• Correct any curl if you are using thick paper.
• For making prints on thick paper or OHP
transparencies, the following functions cannot
be used: Staple, Hole Punch, Folding Options.
• The paper will be printed on the side facing
up.
3-3
1075O024AB