When The Message "Stapler Is Empty." Appears; Replacing The Staple Cartridge - Minolta DI450 Operator's Manual

6-8

3. When the Message "Stapler is empty." Appears

Replacing the Staple Cartridge

Finisher FN-5
1
Holding the Grip, slide the Finisher away
from the machine.
2
Open the Front Door.
3
Slide out the Staple Unit.
The message shown on the left appears when the
staples are running out.
Replace the Staple Cartridge with a new one by
following the procedure given below.
4003P487EA
4
While pressing down the Staple Cartridge
Lever, pull the Staple Cartridge out its port.
4002O187AA
5
Pull the staple sheet about 1-1/4 inches out of
the new Staple Cartridge and break off that
portion.
4002O339AA
1155O068AA
1155O069AA
1136O012AA