Note On Stapling - Minolta Di620PE Operato's Manual

3-14
3. Selecting the Finishing

Note on Stapling

When prints are made using the stapling function, the stapled print sets may not be neatly stacked on the
tray or may even fall off the tray unless certain conditions are met regarding the number of prints to be
stapled and the number of print sets to be made. Use the following table as guide when making prints.
No. of Prints Stapled
2 prints
3 to 5 prints
6 to 10 prints
11 to 20 prints
21 to 30 prints
31 to 40 prints
41 to 50 prints
Di620PE Operator's Manual
Print Set Capacity
When Finisher FN-102 is Mounted
"× "
A3L to A4 to Letter
, 11 17 L
200 sets
150 sets
100 sets
70 sets
53 sets
45 sets
40 sets