When A Staple Misfeed Occurs; Clearing The Staple Misfeed - Minolta Di620PE Operato's Manual

4-30

5. When a Staple Misfeed Occurs

Clearing the Staple Misfeed

<Only when the Finisher FN-102 is mounted>
1 Open Misfeed Clearing Guide
2 Remove the sheet of paper and close Misfeed
Clearing Guide FN1
3 Press and turn the knob to open the cover at
the rear of the Finisher.
Di620PE Operator's Manual
If a staple misfeed occurs, the message shown on
the left appears.
Clear the staple misfed according to the procedure
given below.
4115O042CA
FN1
. 4
1166O173AA
5
.
1166O174AA
6
1155O766AA
Pull the Stapler Unit out of the well.
While pressing down the green lever, pull out
the Staple Cartridge.
Push up the guide of the Staple Cartridge and
pull out one staple sheet.
1166O127AA
1166O128AA
1166O177AA