Table of Contents
Advertisement
4
Shake the new Toner Bottle well and turn it
over lengthwise five times.
5
With the "UP" marking on top, insert the
Bottle into position.
Check that the marking on the Bottle is
aligned with the marking on the Toner
Bottle Holder.
Pull the seal off the Toner Bottle.
6
Di620PE Operator's Manual
2. When the Message "Replenish Toner." Appears
7
Swing the Toner Bottle Holder closed and
close the Front Door.
1075O266AA
NOTES
• Use ONLY the specified toner for this printer.
Using any other toner could result in trouble.
• Do not throw away, but keep, the used Toner
Bottle which will be collected by your Tech.
Rep.
• Be careful not to drop the Toner Bottle from a
1 m or more height. It may cause damage to
the Toner Bottle.
• When the Front Door is closed, the printer
automatically starts replenishing the supply of
toner. During this period, do not attempt to
turn OFF the Power Switch or open the Front
4115O046AA
Door.
Toner Replenisher
Use the Toner Replenisher function available
from the User Mode if the image is light
immediately after the Toner Bottle has been
replaced with a new one.
1075O058AA
4-7
1075O059AA
Advertisement
Table of Contents
