Selecting The Finishing Function - Minolta Di620PE Operato's Manual

Selecting the Finishing Function

Sort/Group
Select the desired finishing function.
1
Refer to the printer driver manual
(PrintStation Manager Reference Manual)
for a detailed description of the setting
procedures and setting items.
NOTES
• When the Finisher FN-102 is installed, prints
are fed out in a sawtooth manner in Sort or
Group mode.
• When the Finisher FN-3 is installed, sorted
sets and grouped stacks are separated by a
separator page.
• When a Finisher is not installed, sorted sets
and grouped stacks are separated by a
separator page.
Di620PE Operator's Manual
3. Selecting the Finishing
Useful Tips
• Shift Sorting
The sorted print sets are stacked in the same
direction, but in a sawtooth manner by
shifting the tray to the front or rear for each
set.
• Shift Grouping
The grouped print stacks are stacked in the
same direction, but in a sawtooth manner by
shifting the tray to the front or rear for each
stack.
3-5
1166O033AB
1166O035AB