NOTE
Check that no portion of the staple sheet hangs
out of the cartridge. Break off any portion of the
sheet that hangs out of the cartridge.
6
Insert the new Staple Cartridge until it clicks
into position.
7
Push the Staple Unit back in and close the
Finisher Front Door.
Di620PE Operator's Manual
3. When the Message "The Staple Cartridge is empty." Appears
8
Slide the Finisher back against the printer.
9
Test the stapler by placing a sheet of paper
into the Manual Staple Tray (see p. 3-8).
1134O076AA
Press the
1155O070AA
10
Remove the sheet of paper to check that it
has been properly stapled.
* If no staples are evident, repeat the procedure
from the beginning.
1155O071AA
NOTES
• Replace the Staple Cartridge only after you
are prompted to do that by the message.
Removing the Staple Cartridge before then
will result in stapling trouble.
• After a new Staple Cartridge has been
installed, be sure to run a test-stapling
sequence to ensure that staples are properly
driven into the paper.
4115O015AA
key.
1155O038AA
1155O644AC
4-9