Minolta Di620PE Operato's Manual page 10

Terms and Symbols for the Type of document and Paper
A few special terms and symbols are used in this manual to designate types of paper. This page explains
about these terms and symbols.
Feeding Direction (paper path)
In this printer system, paper is taken up from the right-hand side of the printer and fed through the printer
toward the left-hand side, face up onto the Tray. In the figure below, the direction in which the paper is
fed, as indicated by the arrow, is called the "feeding direction."
"Width" and "Length"
Terms and Symbols Used
Di620PE Operator's Manual
When we talk about the size of the document or
paper, we call side A "width" and side B "length."
A: Width
B: Length
1139O1610A
<Lengthwise
When the document or paper has a "length" longer
than its "width," we call it "lengthwise" and use
symbol "L" or "
1139O1610A
<Crosswise
When the document or paper has a "length" shorter
than its "width," we call it "crosswise" and use
symbol "C" or "
1139O1620A
4115O002AA
>
."
>
."
ix