2
Specifying the Scan Settings
The following scan settings can be specifying when scanning a document.
These settings are specified from the touch panel of the machine.
Item
File Type
Resolution
Simplex/Duplex
Original Type
Scan Size
Density
Original Setting
Application
!
Detail
For details on the scan settings, refer to "Specifying the Scan Settings"
on page 3-47.
Specifying Program Settings
The destination and scan settings can be registered together as a single
program. This is convenient for frequently scanning documents and sending
data under the same conditions.
These settings are specified from the touch panel of the machine.
!
Detail
For details, refer to "Registering Program Destinations" on page 4-28.
Specifying Default Scan Settings
The settings that are selected when [Scan] in the control panel is touched
can be specified.
2-10
Before Using the Scan Functions
Description
Selects the file type for saving the scanned data.
Selects the scan resolution.
Selects whether to scan one side of the document or both sides.
Sets the image type of the scanned document.
Sets the paper size to be scanned.
Specify the density for scanning.
Specifies the type of document that is loaded, for example, if it
contains mixed page sizes.
Provides functions for adjusting the image to be scanned, for ex-
ample, for scanning books and for scanning pages.
bizhub 500/420