Konica Minolta BIZHUB 500 User Manual page 299

Specifying Settings Using PageScope Web Connection
LDAP
LDAP Server Address
Port Number
Enable SSL/Port Number
Search Base
Search Timeout
Max # of LDAP Hits
Authentication Method
User Authentication
Login Name
Password
Domain Name
bizhub 500/420
Enables/disables LDAP.
Enter the LDAP server address (syntax: "***.***.***.***" or
FQDN where the input range of *** is 0 to 255).
Enter the port number used to communicate with the LDAP
server (input range: 1 to 65535).
Specify whether to perform communications with the LDAP
server using SSL/TLS.
Enter the search start point of the LDAP search (up to 255
characters).
Enter the LDAP search timeout (input range: 5 to 300 sec-
onds).
Enter the maximum number of hits to be received as the LDAP
search result (input range: 5 to 1000).
Set the LDAP authentication method.
Sets the "User Authentication" when an item other than
"anonymous" is selected in the authentication method. If the
"User Authentication" is set to "Enable", manually enter your
login information in an LDAP search. If it is set to "Disable",
the login information registered on the device is used to con-
nect the LDAP server.
Enter the login name if authentication is not set to "anony-
mous" (up to 255 characters).
Enter the password if authentication is not set to "anony-
mous" (up to 128 characters).
Enter the domain name if authentication is set to "Active Di-
rectory" (up to 64 characters).
5
5-57