Konica Minolta BIZHUB 500 User Manual page 38

3
No. Part Name
6 [Scan] key
7 [Copy] key
8 [Interrupt] key
9 [Reset] key
10 Sub power switch
11 [Stop] key
12 [Start] key
13 Main Power indicator
14 Data indicator
15 [Proof Copy] key
16 [C] (clear) key
17 Keypad
18 [Mode Check] key
19 [Utility/Counter] key
20 [Mode Memory] key
21 [Help] key
22 [Accessibility] key
23 Contrast dial
24 [Enlarge Display] key
3-4
Scanning Documents
Description
Press to enter Scan mode.
While the machine is in Scan mode, the indicator on
the [Scan] key lights up in green.
Press to enter Copy mode.
While the machine is in Copy mode, the indicator
on the [Copy] key lights up in green.
For details, refer to the User manual [Copy Opera-
tions].
Press to enter Interrupt mode.
While the machine is in Interrupt mode, the indica-
tor on the [Interrupt] key lights up in green and the
message "Now in Interrupt mode." appears on the
touch panel. To cancel Interrupt mode, press the
[Interrupt] key again.
Press to clear all settings (except programmed set-
tings) entered in the control panel and touch panel.
Set to ON or OFF the operations of the Network
Scanner including the copying, printing and scan-
ning. While OFF is selected, the machine stays in a
power-saving mode.
Press the [Stop] key during scanning to stop the
scan operation.
Press to start scanning. When this machine is ready
to begin scanning, the indicator on the [Start] key
lights up in green. If the indicator on the [Start] key
lights up in orange, scanning cannot begin.
Press this key to continue a stopped job.
Lights up in green when the machine is turned on
Flashes in green while a print job is being received
Lights up in green while a print job is queued to be
printed or while it is printing.
This key is not used in scanner mode.
Press to erase a value entered using the keypad.
Use to type in various values.
Press to display screens showing the specified set-
tings.
The display will change to the Utility/Counter
screen.
This key is not used in scanner mode.
Press to display the Main Help Menu screen, where
descriptions of the various functions and details of
operations can be displayed.
Press to display the screen for specifying user ac-
cessibility functions.
Use to adjust the contrast of the touch panel.
This key is not used in scanner mode.
bizhub 500/420