Konica Minolta BIZHUB 500 User Manual page 90

3
– Touch [Custom Size] to display a screen for specifying the size.
Use the keypad or touch [-] and [+] to specify the size. Touch [¤] to
switch between the integer and the fraction. The integer can be
specified in increments of 1 inch, and the fraction can be specified
in increments of 1/16 in. Touch [OK].
– If the values are in millimeters, use the keypad to specify the size.
4
Touch [OK], and then touch [OK] in the next screen that appears.
3-56
Scanning Documents
bizhub 500/420