Konica Minolta BIZHUB 500 User Manual page 146

4
7
Touch [Index] and touch the desired button.
– This specifies the characters used to index the destination.
– For destinations that are often used, specify [Main] at the same
time, and it will be easier to search.
– If the first character of the name is a letter, the first character is
automatically registered as the indexing character.
– The registration cannot be completed unless a user box name is
specified for "User Box Name".
8
Touch [OK], and then touch [OK] in the next screen that appears.
The box destination is registered.
!
Detail
To check the registered destination, touch the button for the destination,
and then touch [Check Setting].
To change the registered destination settings, touch the button for the
desired destination, and then touch [Edit].
To delete the registered destination, touch the button for the desired
destination, and then touch [Delete].
Note
To cancel changes to the setting, touch [Cancel].
!
Detail
To specify a user box name, boxes must be registered in advance. Refer
to the User manual [Copy Operations] for more details.
For the procedure to enter characters, refer to "Entering Text" on
page 7-6.
4-24
Specifying Settings From the Control Panel
bizhub 500/420