Konica Minolta BIZHUB 500 User Manual page 267

Specifying Settings Using PageScope Web Connection
When "G3Fax" is selected
Number
Name
Address Book
Direct Input
No Destination
Resolution
File Type
Document Mode
Original Image Type
Separate Scan
Density
Background Removal
Original Size
Transmission Timer Set-
ting
Password Submission
F Code
Bind
Special Original
Frame Erase
Stamp
bizhub 500/420
Enter the registration number.
Enter the registration name (up to 24 characters).
Select the destination from the registered abbreviated destinations.
Directly enter the destination. Specify settings for the following.
• FAX number
• G3 destination assignment
• Circuit assignment
• V34 Off
• ECM Off
• Overseas communication
No destination is specified.
Select the resolution.
Select the file format.
Select "Single Sided" or "Double Sided".
Select the quality of the original such as text or photo.
Enable/disable the "Separate Scan" function.
Select the density.
Adjust the background depth.
Select the original size ("Auto" or "Custom Size").
Enable/disable the "Timer Transmission" function. If "Enable" is se-
lected, set the transmission time.
Enable/disable the "Password Submission" function. If "Enable" is
selected, enter the password.
Enable/disable the "F code" function. If "Enable" is selected, enter
the SUB address and the password.
Select the original binding position.
Select for special originals.
Specify the width of the perimeter of the document to be erased.
Select "Enable" or "Disable".
5
5-25