Konica Minolta BIZHUB 500 User Manual page 142

4
6
Touch [Host Address] and enter the host address or IP address.
– To enter the host address, touch [Host Name Input], and then type
in the host address using the keyboard that appears on the screen.
– To enter the IP address, touch [IP Address Input], and then enter
the value. If the value was incorrectly entered, press the [C] (clear)
key to erase the value, and then use the keypad to type in the
correct value. To change an entered value, touch [
move the cursor to the desired position, and then type in the
desired value.
– If [IP Address Input] is touched after entering the host address, the
host address is cleared.
– If the IP address is entered first, then [Host Name Input] is touched,
the IP address that was entered is displayed in the text box.
– Type the host name and file path in uppercase letters.
7
Touch [OK].
8
Touch [File Pass] and type in the file path using the keyboard that
appears on the screen.
9
Touch [OK].
10
Touch [
11
Touch [User ID] and type in the user ID using the keyboard that appears
on the screen.
12
Touch [OK].
4-20
Specifying Settings From the Control Panel
Back] or [Fwd. ].
] and [ ] to
bizhub 500/420