4
6
Touch [Host Address].
–
Enter the host address or IP address.
–
To enter the host address, check that [Host Name Input] is
selected, and then type in the host address using the keyboard that
appears on the screen.
–
To enter the IP address, touch [IP Address Input], and then enter
the value. If the value was incorrectly entered, press the [C] (clear)
key to erase the value, and then use the keypad to type in the
correct value. To change an entered value, touch [
move the cursor to the desired position, and then type in the
desired value.
–
If [IP Address Input] is touched after entering the host address, the
host address is cleared.
–
If the IP address is entered first, then [Host Name Input] is touched,
the IP address that was entered is displayed in the text box.
7
Touch [OK].
8
Touch [File Pass] and type in the file path using the keyboard that
appears on the screen.
9
Touch [OK].
4-16
Specifying Settings From the Control Panel
] and [
] to
bizhub 500/420