Konica Minolta BIZHUB 500 User Manual page 265

Specifying Settings Using PageScope Web Connection
When "User Box (Scan)" is selected
Number
Name
Address Book
Direct Input
No Destination
Resolution
File Type
Subject
Text
Document Mode
Original Image Type
Separate Scan
Density
Original Size
File Format (Page)
File Name
Original Direction
Bind
Special Original
Thick Original
Book Scanning
Frame Erase
Neg-/Positive Reverse
Non-Image Area Erase
bizhub 500/420
Enter the registration number.
Enter the registration name (up to 24 characters).
Select the destination from the registered abbreviated destinations.
Directly enter the destination box number (input range: 1 to
999999999).
No destination is specified.
Select the resolution.
Select the file format.
Specify the subject (Not Specified, 1 to 10: use the subject registered
in the machine).
Specify the text (no text, 1 to 10: use the text registered in the ma-
chine).
Select "Single Sided" or "Double Sided".
Select the quality of the original such as text or photo.
Enable/disable the "Separate Scan" function.
Select the density.
Select the original size ("Auto", "Standard Size" or "Custom Size").
For "Custom Size", specify the horizontal and vertical scanning sizes.
Select "Single Page" or "Multi Page".
Enter the file name (up to 30 characters).
Select the original direction.
Select the original binding position.
Select for special originals.
Select when documents on thick paper are loaded.
Specify whether to scan a spread document or a separated docu-
ment.
Specify the width of the perimeter of the document to be erased.
Select whether or not the black and white areas of the document are
reversed in the scan.
Select whether or not the shadows along the edges of a document
are erased from the scan.
5
5-23