Lpd Settings; To Specify Lpd Settings - Konica Minolta BIZHUB 500 User Manual

Specifying Settings From the Control Panel
4.25

LPD Settings

The use of LPD when printing can be enabled or disabled.

To specify LPD settings

1
In the Administrator Setting screen, touch [5 Network Setting]. (Refer to
page 4-10 for more details.)
2
In the Network Setting screen, touch [0 Detail Setting].
3
In the Detail Setting screen, touch [7 LPD Setting].
The LPD Setting screen appears.
4
Touch [Enable] or [Disable].
5
Touch [OK].
The use of LPD is enabled or disabled.
Note
To cancel changes to the setting, touch [Cancel].
Reminder
To apply network setting changes, turn off the main power of the
machine, wait 10 seconds, and then turn the machine on again.
bizhub 500/420
4
4-109