To Change Scan Settings For Each Original - Konica Minolta bizhub C352 User Manual

Basic copy operations

To change scan settings for each original

When scanning an original while using the "Separate Scan" setting or when
multi-page originals are scanned from the original glass, the scan settings
can be changed for each original. The following procedure describes how to
change the settings when the "Separate Scan" setting is used.
1
Position the original to be copied.
2
In the Basic screen, touch [Separate Scan].
3
Press the [Start] key.
Scanning begins.
4
Touch [Change Setting].
A screen appears, allowing you to change the settings.
5
Touch the key of the setting to be changed, select the desired setting,
and then touch [OK].
– The buttons that appear in the Change Setting screen differ de-
pending on the specified settings. Settings for the following can be
changed.
Simplex/Duplex, Bind, Zoom, Frame Erase, Center Erase, Original
Size
C352
3
3-29