Table of Contents
Advertisement
2
1. Installing the Copier
Installation Site
To ensure utmost safety and prevent possible malfunctions of the copier, install it in a location which
meets the following requirements.
A place away from a curtain or the like that
may catch fire and burn easily.
An area where there is no possibility of
being splashed with water or other types of
liquid.
An area free from direct sunlight.
A place out of the direct air stream of an air
conditioner, heater, or ventilator.
Power Source
The power source voltage requirements are as follows.
Use a power source with little voltage fluctuation.
Voltage Fluctuation
Frequency Fluctuation
Space Requirements
To ensure easy copier operation, supply replacements, and service maintenance, adhere to the
recommended space requirements detailed below.
Allow a clearance of 150 mm or more at the back of the copier as there is a ventilation duct.
230
430
:
Within 10%
:
Within 0.3%
1,651
1,386
1,080
306
650
1149O070AB
A well-ventilated place.
A dry place.
A dust-free location.
An area not subject to undue vibration.
A stable and level location.
1,095
395
Unit: mm
700
1149O071AA
Advertisement
Table of Contents
