102
1. When the Message "The current Paper Drawer is empty." Appears
Example: The 1st Drawer has run
out of paper.
Adding Paper
1st Drawer
Slide out the 1st Drawer.
1
Load the paper stack into the drawer so
2
that its front side faces down.
NOTE
Max.
Max.
1145O555KA
When the drawer currently selected for use runs out of
paper, the message shown on the left appears. The current
copy cycle is interrupted and you cannot then start a new
copy cycle. The blinking drawer has run out of paper.
Fan the paper stack thoroughly.
Add paper by using the following procedure.
The paper should be
loaded no higher than
(Max. Level
Indicator).
Front Side
Slide the drawer back in.
3