Finishing Mode - Minolta EP2080 Operator's Manual

Note the correct direction of the originals if the copies are to be punched using Hole Punch.
NOTE
Hole Punch is possible only when your copier is equipped with a 20-Bin Staple Sorter.
Using the Automatic/Duplexing Document Feeder
Load the originals so that the punched holes in them are located as shown below.
Correct:
Punched Hole Position
Placing the Original on the Glass
Load the originals so that the punched holes in them are located as shown below.
Correct:
Original
Originals
Punched Hole Position

6. Finishing Mode

Copies
1149O089DA
Copy
1149O092EA
55