Selecting The Finishing Function - Minolta EP2080 Operator's Manual

50
6. Finishing Mode

Selecting the Finishing Function

Sort / Group / Sort-and-Staple
Touch the desired finishing function
1
key.
NOTES
The capacity of each Sorter Bin is as
follows
Non-Sort
Type of Paper
Plain and recycled
paper
Special paper (thick
paper, translucent
paper, OHP
transparencies)
Sort, Group, Sort Staple
Bin
10-Bin Sorter, Staple
Sorter (1st to 10th Bin)
20-Bin Sorter, Staple
Sorter (1st to 20th Bin)
When making copies in the Sort Staple
Mode, make sure to load the originals
into the Document Feeder in the
correct direction.
Thick paper, translucent paper, and
OHP transparencies cannot be used for
making copies in Sort, Group, or Sort
Staple.
1149O274DA
Capacity
20 Bin
Up to 100 sheets
10 Bin
Up to 50 sheets
Up to 10 sheets
Capacity
Up to 25 sheets
Up to 50 sheets
(A4 or smaller)
Removing Copier from the Sorter
After the Sort, Group, or Sort Staple
mode is finished, the bins will shift
upward in position. When all movemet
has ceased, then remove your copy sets
or stacks from the bins. Once your
copies are removed, the bins will shift
downward in preparation for the next
strong job.