Installing The Copier; Installation Site; Power Source; Space Requirements - Minolta EP4000 Operator's Manual

2

1. Installing the Copier

Installation Site

To ensure utmost safety and prevent possible malfunctions of the copier, install it in a location which
meets the following requirements.
A place away from a curtain or the like that
u
may catch fire and burn easily.
An area where there is no possibility of
u
being splashed with water or other types of
liquid.
An area free from direct sunlight.
u
A place out of the direct air stream of an air
u
conditioner, heater, or ventilator.
A well-ventilated place.
u
A dry place.
u

Power Source

The power source voltage requirements are as follows.
Use a power source with little voltage fluctuation.
u
Voltage Fluctuation
Frequency Fluctuation

Space Requirements

To ensure easy copier operation, supply replacement, and service maintenance, adhere to the
recommended space requirements detailed below. Allow a clearance of 150mm or more at the back
of the copier as there is a ventilation duct.
300
:
Within 10%
:
Within 0.3%
2,370
200
1,870
1156O008AA
A dust-free location.
u
An area not subject to undue vibration.
u
A stable and level location.
u
A place where ammonia or other organic
u
gas is not generated.
A place which does not put the operator in
u
the direct stream of exhaust from the copier.
A place which is not near any kind of
u
heating device.
Unit: mm
1,310
150
1156O009AA