Table of Contents
Advertisement
2
1. Installing the Copier
Installation Site
To ensure utmost safety and prevent possible malfunctions of the copier, install it in a location which
meets the following requirements.
A place away from a curtain or the like that
may catch fire and burn easily.
An area where there is no possibility of
being splashed with water or other types of
liquid.
An area free from direct sunlight.
A place out of the direct air stream of an air
conditioner, heater, or ventilator.
Power Source
The power source voltage requirements are as follows.
Use a power source with little voltage fluctuation.
Voltage Fluctuation
Frequency Fluctuation
Space Requirements
To ensure easy copier operation, supply replacements and service maintenance, adhere to the
recommended space requirements detailed below.
Be sure to allow a clearance of 150mm or more at the back of the copier as there is a ventilation
*
duct.
1,632
1,359
230
405
:
Within 10%
:
Within 0.3%
1,055
650
304
1151O001AB
A well-ventilated place.
A dry place.
A dust-free location.
An area not subject to undue vibration.
A stable and level location.
1,138
467
Scale: mm
671
1151O002AB
Hide quick links:
Advertisement
Table of Contents
