Instructions For Loading Originals For The Finishing Functions - Minolta EP2080 Operator's Manual

54
6. Finishing Mode

Instructions for Loading Originals for the Finishing Functions

Note the correct direction of the originals if the copies are to be stapled either in Sort Staple or
Manual Staple Mode.
Using the Automatic/Duplexing Document Feeder
Load the originals crosswise in the document feeder. Ensure also that the stapling position is located
as shown below.
Correct:
Stapling Position
Placing the Original on the Glass
Place the original with its stapling position at the upper right corner as shown below.
Correct:
Use Manual Staple to staple copies after they have been made.
*
Originals loaded crosswise
Copies
Stapling Position
1039O2230A
1151O024AB