Konica Minolta Di551 Advanced Information page 361

Settings in Key Operator Mode
Setting
9 Automatic tray switching
10 Platen APS
11 EDH APS
12 Platen AMS
13 EDH AMS
14 Select tray when APS
cancel
15 Platen original size detect
16 EDH original size detect
17 Platen original size detect.
SMALL
18 Rotation
* Initial setting
Di551/Di650
Function
Automatically switches to another paper
tray with the same paper size when paper
runs out.
OFF* / ON
Automatically enables the APS feature
when an original is placed on the original
glass.
OFF / ON*
Automatically enables the APS feature
when an original is loaded into the EDH:
OFF / ON*
Automatically enables the APS feature
when an original is placed on the original
glass:
OFF / ON*
Automatically enables the AMS feature
when an original is loaded into the EDH:
OFF / ON*
The following paper tray is used if the APS
function is disabled:
APS preferential tray* / Tray 1 / Tray 2 /
Tray 3 / Tray 4 / Bypass
Original sizes that are detected when
placed on the original glass:
AB series* / Only A series / Full-image
Area / Inch series
Original sizes that are detected when
loaded into the EDH.
AB series* / Only A series / Full-image
Area / Inch series
Smallest original placed on the original
glass that can be detected automatically.
A5R* / B6R / 5.5 × 8.5R
When rotation is on, this function is enabled:
ON - Always* / ON - APS / AMS only / ON -
APS / AMS / Reduce only
7
7-51