Network Functions
4
Press the [OK] key to confirm the image store password.
The screen for selecting a job appears.
5
Enter the job name for the job that you want to save. Confirm your
selection by pressing [OK].
The output menu appears again.
6
Change any other necessary system settings. Set the number of
copies.
7
Load the originals into the EDH.
?
Do you want to place the originals on the original glass and scan
them?
➜
For more information, see page 4-65.
8
Press the [START] key on the control panel to scan the originals and
then save the data.
When the scanning cycle completes, the data storage screen is
displayed automatically. When all data has been saved to the hard
drive, the basic options appear again.
Di551/Di650
6
6-9