2
DANGER
System overheating can result in fire and/or electrical shock!
The system is equipped with high-voltage components. Incorrect use or
faulty operation of the system may cause the system to overheat. Observe
the following safety precautions to prevent injury and system damage.
➜
Switch off the system immediately if it becomes unusually hot, smoke
rises from the system or you detect an unusual smell. Unplug the
power cable. Consult your technical representative.
➜
If a fuse is tripped during a procedure, repeat the procedure. If a fuse
is tripped again, switch the system off immediately. Consult your
technical representative.
➜
Be sure the fuses correspond to the nominal current ratings specified
on the manufacturer's name plate.
➜
Always unplug the power cable when the system is not going to be
used for a long time.
DANGER
Improper operation of the system can cause injury!
Incorrect operation of the system can lead to personal injury. Observe the
following safety precautions to prevent injuries.
➜
When carrying out a procedure, touch only those parts of the system
that must be touched for this procedure as described in this manual.
➜
Never put your hands into the booklet output of the finisher.
2-18
Getting to Know Your System
Di551/Di650