Basic Functions
Procedure
1
Ensure that the type of paper and the number of sheets meets the
specifications. For more information, see the table on page 4-29.
2
Use the MODE key on the finisher
control field to select the staple
option.
❍
1 staple (diagonal)
❍
2 staples (parallel)
❍
Stapling & Folding (booklet)
❍
Three-folding
❍
Hole-Punch
3
Load the paper to be stapled into
the cover inserter.
❍
Punching and stapling
with the front up
❍
Stapling & folding and
three folding
with the side upward that is to be
outside
4
Align the paper edge guides.
The LED on the START/STOP key lights up green.
5
Press the START/STOP key to start
the staple cycle.
The loaded paper is pulled in and
stapled according to the feature you
selected.
?
How can I interrupt this
process?
➜
Press the START/STOP key again to stop the procedure.
If you are using booklet mode, the incomplete booklet is left in the
stapler unit of the finisher.
Di551/Di650
Hole-Punch feature
select
Stapling and Folding feature
select
START/STOP-key
4
4-31