7
5
Set the desired density level.
❍
Select among the settings [DARKER] or [LIGHTER].
❍
Select a density range (No.1 1~4, No. 2 5~8, . . . or Set density 1)
to print a sample output.
❍
Press the [START] key on the control panel to start printing the
sample output with the selected density settings.
❍
Check the sample output.
❍
Specify the desired value for the density setting using the touch
screen keypad.
6
Press the [OK] key to confirm your input.
The submenu appears again.
7
Press the [RETURN] key.
The key operator mode menu is displayed again.
7-16
Settings in Key Operator Mode
Di551/Di650