Settings in Key Operator Mode
Setting
31
An interruption suspended
way
32
E.K.C. password input
timing
33
Key click sound (No paper/
JAM)
34
Reserve copy function
35
Scan stop by a pull out tray Pulling a paper tray out interrupts the
36
Change page no. pos.
(booklet)
The feature is not released.
37
Trimming
(STD/special size)
38
Timer prevents print
39
Bookmark
40
Overlay delete
* Initial setting
Di551/Di650
Function
Pressing the [INTERRUPT] key on the
control panel interrupts the current copy job.
Division of a number of copies* /
During of a number of copies
The access authorization by input of the
user password runs out.
Panel reset timer* / complete job
Signal tone for low paper or paper misfeed.
OFF / 3 seconds* / 5 seconds / 10 seconds
Automatically switch to the next cleared job.
Reserve copy by folder select* / Reserve
copy by original set
scanning of the original.
ON* / OFF
Page numbers for booklets are placed
automatically on the outside.
OFF* / ON
Enables trimming of folded or stapled and
folded copies in special or wide sizes.
STD* / special size
Specifies the period required after a copy
job before a print job can be started.
OFF / 15 seconds / 30 seconds* /
60 seconds / 90 seconds
Specifies whether a bookmark is only valid
for the active copy job or remains active
after that.
ON (every job disabled)* / ON (not every job
enabled) / OFF
Sets whether data in overlay memory can
be deleted or overwritten.
Every job disabled* / Not every job disabled
7
7-53