Table of Contents
Advertisement
5
4
Confirm your input by pressing [OK].
The basic options are displayed again. The AMS feature is
automatically enabled.
5
Press the [SPECIAL ORIGINAL] key.
The feature for selecting the direction of the original opens.
6
Select the document direction corresponding to the original position.
Confirm your selection by pressing [OK].
The basic options are displayed again.
7
Use the 10-Key Pad to set the number of copies.
8
Load the originals into the EDH.
9
Press the [START] key on the control panel to start the scanning cycle.
The copies begin to be printed after all originals have been scanned.
5-12
Applications
Di551/Di650
Advertisement
Table of Contents
