Table of Contents
Advertisement
Getting to Know Your System
7
Press in and hold the release latch
on the rear side edge guide. Move
the side edge guides so that they
are flush with the paper. When the
edge guides are correctly
positioned, you can release the
release lever.
8
Lower the paper feed roller back in
place.
9
Carefully slide the paper tray back.
If you have changed the paper size,
the new size will be shown on the
main screen.
Loading tab papers!
If you want to process tab papers, insert them as illustrated in the
following figure. Ensure that the paper type "Tab Paper" is set to the
paper tray. For more information, see page 7-30.
Di551/Di650
1, 2, 3
Section 3
Management
1, 2, 3, 1, 2, 3, 1, 2, 3
Section 3
Section 3
Management
Section 3
Management
Management
Section 1
Introduction
Section 1
Section 1
Section 1
Introduction
Introduction
Introduction
2
2-41
Advertisement
Table of Contents
