Table of Contents
Advertisement
4
Procedure
1
In the basic options press the [SPECIAL ORIGINAL] key.
The screen for selecting scan settings appears.
2
Press the [Z-FOLDED ORIGINAL] key.
The background of the key turns black.
3
Confirm your selection by pressing [OK].
The basic options are displayed again.The background of the
[SPECIAL ORIGINAL] key turns black.
4
Configure the system settings for your job.
5
Use the 10-Key Pad to set the number of copies.
6
Load the originals
❍
into the EDH.
7
Align the originals against the back
edge of the EDH. Then adjust the
original guides.
8
Press the [START] key on the
control panel to start the copy job.
4-80
Basic Functions
Di551/Di650
Advertisement
Table of Contents
