Running In The Engine - KTM 525 XC ATV 2008 Owner's Manual

TIPS ON PUTTING INTO OPERATION
Get to know the operating elements.
Adjust the basic position of clutch lever. (
Adjust the basic position of the handbrake lever. (
Adjust the basic position of the footbrake lever.
Become accustomed to handling the vehicle on a suitable piece of land before making a longer trip.
Info
Offroad, you should be accompanied by another person on another machine so that you can help each other.
Do not make any offroad trips that over-stress your ability and experience.
Hold the handlebar firmly with both hands and keep your feet on the footrests when riding.
Do not make any changes to the vehicle and use only KTM approved parts.
Do not exceed the overall maximum permitted weight and the axle loads.
Specification
Maximum permissible overall weight
Maximum allowable axle load
Front
Rear
Run the engine in.

Running in the engine

During the running-in phase, do not exceed the specified engine speed and engine performance.
Specification
Maximum engine speed
During the first 3 service hours
Maximum engine performance during the running-in period
During the first 3 service hours
During the next 12 service hours
Avoid fully opening the throttle!
P. 66)
P. 48)
x
( P. 52)
293 kg (646 lb.)
144 kg (317 lb.)
149 kg (328 lb.)
7,000 rpm
50 %
75 %
19