Choke; Hot Start Button; Shift Lever; Foot Brake Pedal - KTM 525 XC ATV 2008 Owner's Manual

OPERATING ELEMENTS

Choke

Hot start button

Shift lever

Foot brake pedal

The choke knob
Activating the choke function frees an opening through which the engine can draw
extra fuel. This gives a richer fuel-air mixture, which is needed for a cold start.
Info
If the engine is warm, the choke function must be deactivated.
Possible states
• Choke function activated
100014-10
• Choke function deactivated
The hot start button (red)
Activating the hot start function frees an opening in the carburetor through which the
engine can draw extra air. This gives a leaner fuel-air mixture, which is needed for a
hot start.
Info
If the engine is cold, the hot start function must be deactivated.
Possible states
100015-10
• Hot start function activated
• Hot start function deactivated
ble.
The shift lever
100018-10
The gear positions can be seen in the photograph.
The neutral or idle position is between the first and second gears.
Reverse gear can only be engaged with the vehicle at a standstill and the lever pulled.
100017-10
The foot brake pedal
wheel brake.
100016-10
is fitted on the left side of the carburetor.
The choke lever is pulled out to the stop.
The choke lever is pushed in to the stop.
is fitted on the left side of the carburetor.
The hot start button is pulled out to the stop.
The hot start button is pushed in as far as possi-
is mounted on the left side of the engine.
is located in front of the right footrest and operates the rear
17