Communication - Eaton Powerware Series User Manual

Chapter 5
Signal Input 1
Signal Input 2
Standalone/Parallel
REPO (normally-open)
REPO (normally-closed)
DB-9 Communication Port
Redundant Signal Wiring
(For Parallel Use Only)
Relay Output Contacts

Communication

This chapter describes the:
S
DB-9 communication port
S
X-Slot cards
S
Relay output contacts
S
Programmable signal inputs
S
Remote emergency power-off (REPO)
S
Parallel communication
Figure 46 shows the location of the communication options and control terminals on
the UPS.
Figure 46. Communication Options and Control Terminals (Standalone UPS shown)
EATON BladeUPS
X-Slot Communication Bay 1
S
®
(12 kVA) User's Guide 164201649 Rev 4www.eaton.com/powerquality
X-Slot Communication Bay 2
77