Advanced Wan Screen - ZyXEL Communications NBG6716 User Manual

Simultaneous dual-band wireless ac1750 hd media router
Hide thumbs Also See for NBG6716:
Table of Contents

Advertisement

Table 28 Network > WAN > Internet Connection: PPPoE Encapsulation (continued)
LABEL
PPPoE Service
Name
WAN IP Address Assignment
Get automatically
from ISP
Use Fixed IP
Address
My WAN IP
Address
DNS Server
First DNS Server
Second DNS
Server
Third DNS Server
WAN MAC Address
Factory default
Clone the
computer's MAC
address - IP
Address
Set WAN MAC
Address
Apply
Cancel

10.5 Advanced WAN Screen

To change your NBG6716's advanced WAN settings, click Network > WAN > Advanced. The
screen appears as shown.
NBG6716 User's Guide
DESCRIPTION
Enter the PPPoE service name specified in the ISP account.
Select this option If your ISP did not assign you a fixed IP address. This is the default
selection.
Select this option If the ISP assigned a fixed IP address.
Enter your WAN IP address in this field if you selected Use Fixed IP Address.
Select Obtained From ISP if your ISP dynamically assigns DNS server information (and
the NBG6716's WAN IP address). The field to the right displays the (read-only) DNS
server IP address that the ISP assigns.
Select User-Defined if you have the IP address of a DNS server. Enter the DNS server's
IP address in the field to the right. If you chose User-Defined, but leave the IP address
set to 0.0.0.0, User-Defined changes to None after you click Apply. If you set a second
choice to User-Defined, and enter the same IP address, the second User-Defined
changes to None after you click Apply.
Select None if you do not want to configure DNS servers. If you do not configure a DNS
server, you must know the IP address of a computer in order to access it.
The MAC address section allows users to configure the WAN port's MAC address by using
the NBG6716's MAC address, copying the MAC address from a computer on your LAN or
manually entering a MAC address.
Select Factory default to use the factory assigned default MAC Address.
Select Clone the computer's MAC address - IP Address and enter the IP address of
the computer on the LAN whose MAC you are cloning.
Select this option and enter the MAC address you want to use.
Click Apply to save your changes back to the NBG6716.
Click Cancel to begin configuring this screen afresh.
Chapter 10 WAN
91

Advertisement

Table of Contents
loading

Table of Contents