Computer Setup-Exit - HP Pro 2110 Small Form Factor Maintenance & Service Manual

Table 2-16
Boot Device
Priority
Computer Setup—Exit
NOTE:
Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 2-17
Option
Exit Saving Changes
Exit Discarding
Changes
Load Setup Defaults
Discard Changes
Save Changes
22 Chapter 2 Computer Setup (F10) Utility
Computer Setup—Boot (continued)
Allows you to specify which device groups will boot first, second, third, and fourth or to disable any of
the four. Also allows you to set the device boot priority within each group.
1st Boot Device
2nd Boot Device
3rd Boot Device
4th Boot Device
Floppy Group
Boot Priority
CD-ROM Group
Boot Priority
HDD Group Boot
Priority
Network Group
Boot Priority
Computer Setup—Exit
Description
Press Enter to exit saving changes.
Press Enter to exit discarding changes.
Press Enter to load setup defaults.
Press Enter to discard changes.
Press Enter to save changes.
Allows you to set the device group boot priority:
CD-ROM Group
●
Hard Drive Group
●
Floppy Group
●
Network Boot Group
●
NOTE:
MS-DOS drive lettering assignments may not apply after a non-MS-DOS
operating system has started.
Specifies boot device priority within removable devices.
NOTE: This computer does not support floppy drives.
Specifies boot device priority within CD/DVD drives.
Specifies boot device priority within hard drives.
Specifies boot device priority within bootable network devices.