Computer Setup-Main - HP Pro 2110 Small Form Factor Maintenance & Service Manual

Five menu headings appear on the Computer Setup Utility screen:
Main
●
Advanced
●
Power
●
Boot
●
Exit
●
Use the arrow keys to select the appropriate heading, then press Enter. Use the arrow (up and
down) keys to select the option you want, then press Enter. To return to the previous screen, press
Esc.
CAUTION:
(F10) changes because the CMOS could become corrupted. It is safe to turn off the computer only after
exiting the F10 Setup screen.
Computer Setup—Main
NOTE:
Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 2-13
Option
System Time
System Date
System IDs
Language
Floppy Diskette A
18 Chapter 2 Computer Setup (F10) Utility
Do NOT turn the computer power OFF while the ROM is saving the Computer Setup
Computer Setup—Main
Description
Allows you to set system time.
Allows you to set system date.
Allows you to view or change the following system identification information:
● Product Name (press Enter to change)
Serial Number (press Enter to change)
●
● UUID (press Enter to change)
SKU Number (press Enter to change)
●
● Family Name (view only)
Feature Byte (press Enter to change)
●
Build ID (press Enter to change)
●
Allows you to select language.
Allows you to set drive A to:
Disabled
●
● 1.44 MB 3.5"
Not Installed
●