HP Pro 2110 Small Form Factor Maintenance & Service Manual page 174

Cursor moves too fast or too slow.
Cause
Cursor speed needs adjustment.
Wireless mouse does not work after installation or is not detected.
Cause
Mouse is not synchronized with the receiver.
Mouse is out of range of the receiver.
Mouse batteries are not installed or too weak.
164 Chapter 9 Troubleshooting Without Diagnostics
Solution
Adjust the cursor speed:
1. Click Start > Control Panel > Hardware and
Sound > Mouse.
2. Click the Pointer Options tab.
3. Adjust the Motion slider toward Slow or Fast to
decrease or increase the speed at which the pointer
(cursor) responds to mouse movement.
4. Click OK.
Solution
Synchronize the mouse and receiver. Refer to the
documentation included with the mouse for instructions.
Place the mouse closer to the receiver.
Install or replace the Mouse batteries.