Front Bezel - HP Pro 2110 Small Form Factor Maintenance & Service Manual
Hide thumbs
Also See for Pro 2110 Small Form Factor:
- User manual (86 pages) ,
- Specification (12 pages) ,
- Illustrated parts & service map (4 pages)
Table of Contents
Advertisement
Front Bezel
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Press outward on the three latches on the right side of the bezel (1), then rotate the right side of
the bezel off the chassis (2) followed by the left side.
Figure 5-2
NOTE:
The appearance of the front bezel may vary.
To reinstall the front bezel, reverse the removal procedure.
44
Chapter 5 Removal and Replacement Procedures Minitower (MT) Chassis
(Access Panel on page
Removing the Front Bezel
(Preparation for Disassembly on page
43).
42).
Advertisement
Table of Contents
