Computer Setup-Exit; Recovering The Configuration Settings - HP Omni Pro 110 Maintenance And Service Manual

Table 3-4
Floppy Group Boot
Priority
CD-ROM Group Boot
Priority
Hard Drive Group
Boot Priority
Network Group
Boot Priority
Computer Setup—Exit
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 3-5
Option
Exit Saving Changes
Exit Discarding
Changes
Load Setup Defaults
Discard Changes
Save Changes

Recovering the Configuration Settings

To reset all BIOS Setup options to their default values (including options for Ctrl+F10), you must enter
F10 Setup mode and press F5.
This does not include updates to system date, system time, supervisor password, user
password, and CPU frequency multiplier.
12 Chapter 3 Computer Setup (F10) Utility
Computer Setup—Boot (continued)
Specifies boot device priority within removable devices.
Press Enter to select the device, up or down arrow to move the selected device,
device, Esc to abort.
Specifies boot device priority within CD/DVD drives.
Specifies boot device priority within hard drives.
Specifies boot device priority within bootable network devices.
Computer Setup—Exit
Description
Press Enter to exit saving changes.
Press Enter to exit discarding changes.
Press Enter to load setup defaults.
Press Enter to discard changes.
Press Enter to save changes.
Enter to select the