Computer Setup-Exit; Bios Updates - HP TouchSmart 9100 Maintenance And Service Manual

Table 5-5 Computer Setup—Boot (continued)
CD-ROM Group Boot
Priority
HDD Group Boot
Priority
Network Group
Boot Priority
Computer Setup—Exit
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 5-6 Computer Setup—Exit
Option
Exit Saving Changes
Exit Discarding
Changes
Load Setup Defaults
Discard Changes
Save Changes

BIOS updates

HP periodically releases system BIOS updates, which are available from the HP website. These updates
often contain fixes for known issues in the BIOS.
To find out whether a PC needs a BIOS update, compare the current BIOS version number against the
latest version available for download. To determine the current BIOS version, you should perform the
following steps:
1. Click Start, and then select Shut Down.
2. Select Restart, and then click OK.
3. When the first screen displays, press
Main menu.
4. Write down the current BIOS version that is listed.
5. To exit Setup, press Esc, select Yes, and then press Enter.
Specifies boot device priority within CD/DVD drives.
Specifies boot device priority within hard drives.
Specifies boot device priority within bootable network devices.
Description
Press Enter to exit saving changes.
Press Enter to exit discarding changes.
Press Enter to load setup defaults.
Press Enter to discard changes.
Press Enter to save changes.
F10 to enter Setup. The BIOS revision number is listed on the
BIOS updates
55