Computer Setup-Power; Computer Setup-Boot - HP Pro 2110 Small Form Factor Maintenance & Service Manual

Computer Setup—Power
NOTE:
Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 2-15
Option
After AC Power
Failure
S5 Maximum Power
Savings
WOL in S5
NX (No Execute)
Virtualization
Technology
Computer Setup—Boot
NOTE:
Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 2-16
Option
Boot-time
Diagnostic
Screen
Computer Setup—Power
Description
Allows you to select system restart behavior after power loss:
Stay Off
●
● Power On
Auto
●
Disables/enables S5 Maximum Power Savings. Enabling this feature reduces the power of this
system as much as possible in the S5 state. This feature must be disabled if you want to enable
Wake on LAN from S5.
Disables/enables limited Wake on LAN from S5. Note that the computer can only wake from S5
during a normal shutdown event. The S5 Maximum Power Savings feature must be disabled in
order to enable limited Wake on LAN from S5.
Allows you to disable/enable the processor's NX feature.
Allows you to enable/disable the processor's Virtualization Technology feature.
Computer Setup—Boot
Description
Disables/enables POST diagnostic messages display during boot.
HP Pro 3125 – Computer Setup (F10) Utilities 21