Small Form Factor Models - HP Pro 2110 Small Form Factor Maintenance & Service Manual

Rated Input Current (maximum)
1 This system utilizes a passive power factor corrected power supply. The power factor correction is present in the 230V
operating mode only. This allows the system to pass the CE mark requirements for use in the countries of the European Union.
This supply requires the use of an input voltage range select switch.

Small form factor models

Desktop Dimensions
Height
Width
Depth
Approximate Weight
HP Pro 2110
HP Pro 3120
HP Pro 3130
Temperature Range
Operating
Nonoperating
Relative Humidity (noncondensing)
Operating
Nonoperating (38.7°C max wet bulb)
Maximum Altitude (unpressurized)
Operating
Nonoperating
NOTE: Operating temperature is derated 1.0° C per 300 m (1000 ft) to 3000 m (10,000 ft) above sea level; no
direct sustained sunlight. Maximum rate of change is 10° C/Hr. The upper limit may be limited by the type and
number of options installed.
Power Supply
Operating Voltage Range
Rated Voltage Range
Rated Line Frequency
Power Output
Rated Input Current (maximum)
This system utilizes a passive power factor corrected power supply. The power factor correction is present in the 230V
1
operating mode only. This allows the system to pass the CE mark requirements for use in the countries of the European Union.
This supply requires the use of an input voltage range select switch.
6A @ 100 VAC
1
4.43 in
12.25 in
15.33 in
14.75 lb
14.59 lb
14.60 lb
50° to 95°F
-22° to 140°F
10-90%
5-95%
10,000 ft
30,000 ft
115V
90-132 VAC
100-127 VAC
50-60 Hz
270 W
6A @ 100 VAC
1
3A @ 200 VAC
11.25 cm
31.12 cm
38.94 cm
6.69 kg
6.62 kg
6.62 kg
10° to 35°C
-30° to 60°C
10-90%
5-95%
3048 m
9144 m
230V
180-264 VAC
200-240 VAC
50-60 Hz
270 W
3A @ 200 VAC
Small form factor models 195